How To Install A Backup Camera 2008 Wrx

I am looking for more information about the OEM fill-in camera. I was reading from older threads saying the wiring is currently there and it is simply plug and play.
I take a 2008 package 1 with cruise. No SKS, no nav.

I bought the OEM fill-in camera from a junk g and besides got a wiring harness from a different Prius.

I see the pre-wiring in the rear hatch area. I tried plugging in the new harness to the photographic camera but did not get anything to show up on the MFD.

Has anyone added the OEM camera to a non backup camera Prius?
If your Prius did not take the camera or nav, you lot probably accept the low-res MFD screen that cannot testify the backup camera. Look in your owner's manual at the MFD info, if it shows a Type I, Blazon II and Type Iii then yous can place the MFD based on the "splash" screen (Toyota logo) and Hybrid screen. So, you might have the wiring, but a screen that can't use it.
I demand to cheque which one I take.
I was reading other threads and I thought the 2008+ all were the higher res screens.

In that location are some guys who were able to get the camera to work on a 4 button MFD. I don't know if they still are on the forums.
Joined:

Aug 17, 2017

110

fifty

0

Location:

canada

Vehicle:

2005 Prius

Model:

Base
I merely installed the 86110-47210 MFD into my base 05, replacing the original "47080 MFD".
ITbland's M13 pin out data was perfect, re attached. The big wires came out like shooting fish in a barrel but the violet
on pin 25 was stubborn. I used a very fine jewellers screw driver. Brand certain
the locking bar is out, then push the spiral driver firmly into the hole closest to the
border and it will pop. Then y'all tin can pull out the violet wire. I'1000 notwithstanding sorting out the REV+
line for pivot 21....
I've ordered some shielded 3 cadre cable from aliexpress for the camera feed.
Still figuring out the mount since there is no factory hole in the hatch for the camera.
It'south aluminum so magnets won't help to concord it in place. A pic, with minimal parallax,
of a hatch showing the photographic camera hole and the two holes almost it for mounting the plastic piece
that holds the backup lights and door lock release would be a bully help to make a template.....
Attached Files:
Usually the all-time place to pick upwards the reverse line is in the passenger footwell. It is detailed in some other of these fill-in camera threads, I'll look for it and link it hither.
Edit: hither is the link: Wires connection of redundancy photographic camera to MFD !!!
Besides, keep an heart on @DangNabbit , he is doing the conversion likewise and has posted some spectacular info.
Here are some pictures I nerveless from online sources. I'grand all the same in the procedure of finishing up the modernistic. I oasis't found a proficient way to drill and install the OEM camera either.
I hope these images mail service.
Joined:

Aug 17, 2017

110

fifty

0

Location:

canada

Vehicle:

2005 Prius

Model:

Base

Nice endeavor anyway, never be able to get the parallax corrected.
Hoping the wrecker here nevertheless has a unit on the lot, will find out tomorrow...